Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Sniffer trace on the connection between MCU and movi 4.2 client

Dear all,

In our network environment, there are MCU, VCS, TMS and movi 4.2 clients. Since the Movi 4.2 client has reported the poor audio quality in the conference with the MCU, we will try to identify the problem.

There is Sniffer trace application by our network team, may I know any information can be obtain to analysis the video conference problem?

Many Thanks.

Best Regards,

Ben

  • TelePresence
Everyone's tags (1)
1 REPLY

Sniffer trace on the connection between MCU and movi 4.2 client

I would fist start up with trying to see if the issue can be replicated with a updated version of JabberVideo (4.7).

Before that continuing to read is not really worth ;-)

Also the MCU and VCS versions might have an impact so you might want to check that as well

and also how the call flow is (like if it uses interworking or not, is a traversal or local call, ...)

Depending on the media flow a trace on the vcs or where ever the media gues through could be also interesting.

Also what kind of computer is used, operating system, network (loss/jitter/...), ...

You can do a wireshark trace on the client site as well as with a switch with a monitor port upfront the mcu.

There are also debugging capabilites on the Movi/JabberVideo client as well as on the MCU

Please remember to rate helpful responses and identify helpful or correct answers.

Please remember to rate helpful responses and identify

165
Views
0
Helpful
1
Replies
This widget could not be displayed.