We are using a MCU 4500 box for video conferencing along with UCCX 8.5 & CUCM 8.6. Sometimes we need to add a audio only endpoint in a video conference. In those cases the block for the audio only endpoint is blank. Is it possible to put a still pic of that person in that block?
There is no such option available at the moment on MCU software. There is two scenarios here, one that as soon as the audio only participant joins the conference his/her standstill image get displayed in the video conference which requires a bank of photos matching as the dialed extension of that participant. It could many to one mapping, as one participant may have many different extensions.
The second scenario would be the MCU administrator upload a photo of the audio only participant before or during the video conference which is a bit laborious.
As mentioned there is no such functionality currently available. You can open a TAC case and request such an enhancement feature to be built into future software releases.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...