Is it possible to suppress individual icons that display on the TX9X00 plasma displays? My customer is on a secure MPLS but doesn't have media / signalling encryption enabled on the endpoint so the unlocked padlock appears when calls to / from the TX start. They would like to stop this icon from appearing.
On the TC Series codecs (C, SX, EX, etc), there is a setting in the web interface that can be found under Configuration, System Configuration, Video, OSD, Encryption Indicator. This can be set to Auto/AlwaysOn/AlwaysOff. You can change it via the CLI with:
xconfiguration Video OSD EncryptionIndicator: AlwaysOff
I haven't played with a TX9x00, but perhaps there is a similar setting there?
Please remember to rate responses and to mark questions as answered if appropriate.
Wayne -- Please remember to rate responses and to mark your question as answered if appropriate.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.