Hi, I have a SX20 - TC18.104.22.1688e4a9 it is always outputing Presentation audio even though no Presentation is being sent. Other SX/C Series models have the option to have "Video Association" to the audio but the SX20 does not have the option. How do I resolve this issue?
Thanks for your reply. This is inconsistent with the rest of the conference range of devices Cisco provide. The other units have the capabilities to change the audio settings to suit the required application.
Is this limited at the hardware or software level?
The C20 behaves the same way - the difference between the C/SX20 and the C40/60/90 and SX80 is the latter are positioned as integrator codecs and as a result have more features, like the ability to tie the audio input to a video input. As you know the SX20 and C20 don't do that, they are independent inputs. To Wayne's point I think it's like this because you might want to use the audio input for something else - like connecting a phone to it (I've seen this done). I can't say for sure that this is/isn't a hardware limitation.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...