SX20 using VCS phonebooks works when registered to VCS-E but not when proxy registered to VCS-C?
I'm trying something new to me, provisioning an SX20 from a VCS Expressway for a home office. I have provisioning and registration working correctly.
Phonebooks work fine when the SX20 is registered to the Expressway, however if I remove the SIP domain from the Expressway to force a proxy registration, the endpoint continues to register / provision OK , but it doesn't receive phonebooks.
A jabber client on the same Expressway receives phonebooks in both scenarios (either natively registered to the Expressway or proxy registered to the Control).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...