Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

SX20 with Smart Board

Hi

My customer is seeking for SX20.

They would also like to integrate SX20 with the smart board to display the smart board to the remote sites.

My question is, if I do not include the Dual Display option license, will it work with Smart Board.

Or is it necessary to have dual display for this particular cases.

Best Regards

Syahrir

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SX20 with Smart Board

Hi Syahrir,

Yes, you can share your screen through SX20 - but you will need to either

1) Get a telepresence SYNCH Unit

http://www.cisco.com/en/US/products/ps11653/index.html

http://www.cisco.com/en/US/docs/telepresence/endpoint/software/synch/synch_release_note_v4-01.pdf

Unit EOS/EOL

2) Get a video switch/duplicater than splits the video into two. One cable into the projector, one cable into the presentation input of the codec.  Please note that this is not something that is officially supported by Cisco - so you will not be able to buy the switch/duplicater from us.

3) You could try to use the SX20 and dual display option. But I am not sure if this will work correctly, as I have not tested it. I have however tested option 2.

Thanks

//Marius

4 REPLIES
Cisco Employee

Re: SX20 with Smart Board

Hi Syahrir,

Yes, you can share your screen through SX20 - but you will need to either

1) Get a telepresence SYNCH Unit

http://www.cisco.com/en/US/products/ps11653/index.html

http://www.cisco.com/en/US/docs/telepresence/endpoint/software/synch/synch_release_note_v4-01.pdf

Unit EOS/EOL

2) Get a video switch/duplicater than splits the video into two. One cable into the projector, one cable into the presentation input of the codec.  Please note that this is not something that is officially supported by Cisco - so you will not be able to buy the switch/duplicater from us.

3) You could try to use the SX20 and dual display option. But I am not sure if this will work correctly, as I have not tested it. I have however tested option 2.

Thanks

//Marius

SX20 with Smart Board

Hi Marius

If i use the 2nd method, does it means i dont have to include/buy dual diplay option.

Syahrir

Cisco Employee

SX20 with Smart Board

Hi,

Exactly.

//Marius

SX20 with Smart Board

Hi Marius

Thanks for the answer

Best Regards

Syahrir

474
Views
0
Helpful
4
Replies