Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Tandberg 990 MXP TTC7-08. Factory default settings

Hi everybody !

I have some problem with Tandberg 990 MXP TTC7-08, I’m trying to reset this device, but I don’t know how to do this with remote control.

Can someone help me ?

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Tandberg 990 MXP TTC7-08. Factory default settings

Hi,

With the DVI output of the codec connected to your display, try the following :

     a) Press ‘Phonebook’ button 5 times (audible tone will be heard)    

     b) Press the number ‘2’ key                                                                                                                                                                

see if you get the menu back

Regards,

Tang

=====

4 REPLIES
VIP Super Bronze

Tandberg 990 MXP TTC7-08. Factory default settings

The MXP Administrator Guide (T9) covers this on page 19.

Please rate helpful responses.

Please remember to rate helpful responses and identify helpful or
New Member

Tandberg 990 MXP TTC7-08. Factory default settings

My Tandberg didn't show me any settings menu

New Member

Tandberg 990 MXP TTC7-08. Factory default settings

Is you dispaly DVI or Svideo connected to the codec ?

If its DVI then it may be the unit is configred for dual monitors and Menu on PC setting is set to off.

If you are S video connected, then try the DVI if you dont get a menu on either you will need to factory default via serial or web if you know the IP address and password

When you factory defaulty it cna  remove the option keys  so take a recordof them before you factory default.

Cisco Employee

Tandberg 990 MXP TTC7-08. Factory default settings

Hi,

With the DVI output of the codec connected to your display, try the following :

     a) Press ‘Phonebook’ button 5 times (audible tone will be heard)    

     b) Press the number ‘2’ key                                                                                                                                                                

see if you get the menu back

Regards,

Tang

=====

11610
Views
5
Helpful
4
Replies