I had a question regarding TC6.3 that I am deploying to my C60s. In the past, if you had monitors set to dual, you would have the ability to press the Layout button on the remote control and select between Fullscreen or Equal Participants. Now it seems as though I have to navigate into the Advanced Settings to change the SelfView Default options in order to change between one or the other. This is way more navigating than I would want my customers to do. Is there an option to enable these options via the Layout button or is there something that we might be missing? Any help would be greatly appreciated. Thanks!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...