we updated five Clinical Assistant (SX20) to the suggested TC7.2. Now we got the following problem on all the systems. When the system reboots the presentation mode is activated. The users don't see the normal wallpaper until they are pressing the presentation button on the remote control and deactivate the startet presentation.
Has anyone else seen this problem and is there a workaround for this problem? I can't find any setting which has an impact to this behaviour.
thanks for the reply. Not the self view is the problem, the presentation is started while booting. When the system boots the presentation is automatically active (on all five clinical assistants). But there is nothing connected to the vga cable, so the background is black. The user has to press the presentation button on the trc to deactivate the presentation and see the normal background, but after a restart the presentation is automatically started again.
Nevertheless I tried to change the setting you wrote. but as I thought, it has only an effect on the self-view.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.