Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

TCP/UDP port usage for the EX90

Does anyone have a list of port usage for the EX90s they can share?

2 REPLIES
Community Member

TCP/UDP port usage for the EX90

there is no Port reference for any Endpoint like EX90, EX60 and C-Codecs. The Port References for TMS, MCU and VCS are also very different.

You can advise the needed ports by looking into this doc:

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_IP_Port_Usage_for_Firewall_Traversal_Deployment_Guide_X4_to_X7.pdf

I wish for christmas a complete port reference for all boxes.

Cisco Employee

TCP/UDP port usage for the EX90

Hello,

There were these documents H323 and SIP but these are now outdated I believe as you can set the range of media ports use in the codecs by the commands ...

xConfiguration RTP Ports Range Start: 2326

xConfiguration RTP Ports Range Stop: 2486

in the later releases of TC software (TC4/5), so now for the media you can define the port range used.  SIP and H323 signalling will still use the ports mentioned in the documentation.

Thanks

2530
Views
0
Helpful
2
Replies
CreatePlease to create content