I have a quick question for a TP deployment. The client wants to use (3)1300 TP screens, with the CTS Mananger, CUCM Manager, and a Multipoint Switch. The question is that they would also need to incorporate webcam type execs into the mix. What is the recommended solution (CUVA?) and what is the base CUVC item do we need to achieve this? I have been looking at the 3515-12 MCU and wanted to know if this will achieve this request.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...