We have two DX70s running CE8.2. We were able to configure the PLAR using SIP dial rules when they were running the android version of code 10.X. We upgrade to the CE8.2 code to gain some additional features. We have checked the documentation for the CE8.2 code and it does support PLAR. However, we are unable to get it working correctly. We can not find anywhere on the UCM device configuration page to set a SIP dial rule.
The goal is to be able to press the call button without dialing and it be able to call the other one and vice vera. Each one has been set to auto answer on speaker. Only message we get on the screen is "SIP cannot connect call" when pressing the call button.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4