cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
908
Views
0
Helpful
2
Replies

testing network for video conf. Cisco best practice

chris.lewis
Level 1
Level 1

Is there documentation and software for testing the network for not only immersive systems but multipurpose rooms as well? Cisco TelePresence Readiness Assessment Manager? Please provide documents for best practice.

Thanks

Sent from Cisco Technical Support iPad App

1 Accepted Solution

Accepted Solutions

aostense
Level 1
Level 1

Hi Chris,

Please find the document "Cisco TelePresence Network Systems 2.0 Design Guide" for the CTS series here:

https://supportforums.cisco.com/docs/DOC-23422

For the immersive T3 systems, we have another document, please take a look at this document:

https://supportforums.cisco.com/docs/DOC-23391

Are there any specific endpoints/infrastructures you would need more network readiness information for?

For more information regards to Understanding Cisco TelePresence Latency Jitter and Loss Targets and Thresholds, please take a look here:

https://supportforums.cisco.com/docs/DOC-23423

The only TelePresence network readiness software (that I know of), is the old IPT tool. This tool will test your network deployment to verify proper configurations to support the Cisco Expressway firewall traversal solutions (I can send you this application separately if you'd like).

Hope this helps,

Arne

View solution in original post

2 Replies 2

aostense
Level 1
Level 1

Hi Chris,

Please find the document "Cisco TelePresence Network Systems 2.0 Design Guide" for the CTS series here:

https://supportforums.cisco.com/docs/DOC-23422

For the immersive T3 systems, we have another document, please take a look at this document:

https://supportforums.cisco.com/docs/DOC-23391

Are there any specific endpoints/infrastructures you would need more network readiness information for?

For more information regards to Understanding Cisco TelePresence Latency Jitter and Loss Targets and Thresholds, please take a look here:

https://supportforums.cisco.com/docs/DOC-23423

The only TelePresence network readiness software (that I know of), is the old IPT tool. This tool will test your network deployment to verify proper configurations to support the Cisco Expressway firewall traversal solutions (I can send you this application separately if you'd like).

Hope this helps,

Arne

Thank you!

Sent from Cisco Technical Support iPad App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: