Hi I have a setup where there are 2 c20 setup on a internal company network. Origginally they used the system for meetings internaly but now they want the unit in there main office to have connection to the outside world as well. Easy enough get a public IP and NAT the internal IP to the external IP, set the NAT settings in the codec acordingly and things are good. Well no... When the unit has the nat settings it will not route to the other unit on the internal network, so the one that has no NAT will not get any media back, blocked in the firewall. What would be the easyest way to set the unit up so it would both call the internaly and externaly? The second unit will probably never have internet access.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4