Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Tms ad hoc conference

Hi,

 

Before, when a point to point call is initiated,  in tms the call appeared as active but not now. someone knows why this can happen ??

 

I review the option : "Administrative tools / Configuration / Netword Setting / Enable Ad Hoc Conference Discovery" and is to YES

 

I think that the problem is because a flow comunication but a can´t see documentation about this.

 

Regards!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi,In addition to what Wayne

Hi,

In addition to what Wayne suggests, check that the TMS server's IIS allows anonymous authentication to /tms/public/. I recommend doing a network trace on the TMS server, and checking how feedback events from the endpoints are received by IIS.

Regards,
Kjetil

4 REPLIES
VIP Green

Your endpoints need to be

Your endpoints need to be able to talk back to the TMS server on ports 80/443 so they can tell TMS they're in a call.  Similar for the rest of your infastructure (VCS, MCU, ISDN GW, TCS, etc).

Check your firewalls to see that all your devices are able to talk to TMS.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Cisco Employee

Hi,In addition to what Wayne

Hi,

In addition to what Wayne suggests, check that the TMS server's IIS allows anonymous authentication to /tms/public/. I recommend doing a network trace on the TMS server, and checking how feedback events from the endpoints are received by IIS.

Regards,
Kjetil

New Member

Thanks for you reply.I enable

Thanks for you reply.

I enable anonymous authentication to tms/public/ and now, work properly. There are some guideline whith the datails about how configure the IIS in server??

 

Regards!!!!

VIP Green

If you re-install TMS on to

If you re-install TMS on to the server, it should reconfigure the IIS settings to be correct.

I'd also continue to investigate, as I suggested before and confirmed by Kjetil, if there any firewall or proxy servers between your endpoints and TMS that they ensure that your devices have direct access to the TMS server to post their feedback.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
86
Views
0
Helpful
4
Replies
CreatePlease to create content