Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

TMS Agent Replication TMS 13.1.2 VCS X6.1


I am setting up Movi but I can't manage to set up TMS Agent replication with VCS Control.

I get a message in the Activity Status log in TMS.

"Unable to enable replication for 'vcs' A DNS lookup of the TMS host name on this VCS does not match the TMS IP address"

I double checked DNS settings and a nslookup from different DNSs succesfully resolves both my VCS Control and TMS addresses.

My DNS service is running on the same network with TMS.

Does anyone knows how to solve this problem?

I followed step by step the TANDBERG's Provisioning Guide but I am stuck in this step.

I will appreciate any help on this.

Cisco Employee

TMS Agent Replication TMS 13.1.2 VCS X6.1


First of all, check that the dns configuration is correct on the TMS and the VCS. Do an nslookup of the TMS servers FQDN in the commandline and see if it resolves to the correct ip. Do the same on the VCS (login via SSH as root).

If it resolves correctly, go to the admin tools, config, network settings and check that the IPv4 address and TMS FQDN matches the TMS servers actual settings.

If they match, reboot the TMS server and the VCS and try to re-enable it again. A couple of questions:

Is the TMS server added to a domain?

Is the TMS and the VCS on the same subnet?

Have you enabled replication on this VCS before or has it been working before at all?

Make sure the VCS is tracked by hostname.

If none of this helps you, please raise a TAC case on this.