In the T3 TCU setup (via touch panel), in the screen where you put in the External Manager, when I start typing on it, the OK button gets greyed out and the font becomes red in that field. Any ideas why it is happening?
On the TMS, which one do you add the IP of the TCU or the center Codec? I added the center codec IP address and it was successfull as I can see the T3 in the Systems->Navigator. TMS can talk to it but when I create conference, it doesnt show as one of the endpoint.
In the TMS, add the IP address of the TCU for call scheduling. To add TCU, you need to go to advanced settings and select discover Non-SNMP systems.
You can choose to add the C90 codecs, but that is optional for T3. Adding of C90 means you can monitor the C90 activities etc.
After you add the TCU into the TMS, you can push the phone book etc to the TCU.
Ok, there is an issue in TCU 4.1 that prevents it from being added into TMS. this will be fixed in the next TCU release.
In the mean time, you can work around this by downgrading your TCU to 4.03 then add it to TMS and then upgrade ba k to tcu4.1 again.
Hope this help.
Sent from Cisco Technical Support iPhone App