Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
VIP Super Bronze

TMS - Endpoint SNMP Traphost Address

Should I see the SNTP traphost address field under the "Settings" view for a C-Series, EX, E20 endpoints that are managed by TMS?  Is it okay to leave this field blank or should it contain the IP or DNS address of TMS, in conjunction with the SNTP settings on the endpoint itself?

Thanks, Patrick

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Bronze

TMS - Endpoint SNMP Traphost Address

Hi Patrick, For Endpoints that Cisco TMS uses SNMP to communicate with, the Traphost IP Address is also set. This is done automatically on all systems if the Enforce Management Settings on Systems is enabled in Network Settings > Cisco TMS Service pane.

Cisco Employee

TMS - Endpoint SNMP Traphost Address

Hi Patrick,

All SNMP traps from TC and TE software systems are ignored by TMS, so you can safely leave these fields blank.

-Kjetil

3 REPLIES
Bronze

TMS - Endpoint SNMP Traphost Address

Hi Patrick, For Endpoints that Cisco TMS uses SNMP to communicate with, the Traphost IP Address is also set. This is done automatically on all systems if the Enforce Management Settings on Systems is enabled in Network Settings > Cisco TMS Service pane.

VIP Super Bronze

TMS - Endpoint SNMP Traphost Address

I take it the C-Series, EX, and E20 doesn't use SNMP, since they communicate over HTTP/HTTPS?

Cisco Employee

TMS - Endpoint SNMP Traphost Address

Hi Patrick,

All SNMP traps from TC and TE software systems are ignored by TMS, so you can safely leave these fields blank.

-Kjetil

773
Views
0
Helpful
3
Replies
CreatePlease to create content