05-18-2012 07:41 AM - edited 03-17-2019 11:11 PM
Hello,
My TMS version is 13.2, new installation.
I tried to enable TMS agent under Administrative tools->configuration->General->enable tms agent. After all, I don't see any process under activity status.
If I connect to VCS, under Systems > Navigator, selecting the VCS and TMS agent tab, I see "
Successfully connected to the TMS agent running on this VCS." but there's an error message "
Unable to connect to the TMS agent running locally on this TMS server."
Any idea about this issue? Thanks
Solved! Go to Solution.
05-18-2012 01:33 PM
Hi Curtis
Since its a new installation and you are running 13.2 i recommend you to install the tms provisioning extension. The tmsagent is the old provisioning model.
https://supportforums.cisco.com/thread/2145898
Follow this thread for document and dowload links.
/Magnus
Sent from Cisco Technical Support iPhone App
05-18-2012 01:33 PM
Hi Curtis
Since its a new installation and you are running 13.2 i recommend you to install the tms provisioning extension. The tmsagent is the old provisioning model.
https://supportforums.cisco.com/thread/2145898
Follow this thread for document and dowload links.
/Magnus
Sent from Cisco Technical Support iPhone App
05-22-2012 12:22 PM
Great, this fixed the issue, thanks much.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide