I have a situation where TMS Server is not part of the domain or not in the AD as a object. But TMS is configured (under the network settings-> Ad authentication) to connect to the AD server. Basically we have created the service account in the AD server for the TMS Server to authenticate. TMS Server connected successfully with the AD server. But the AD users having an issue to login to the TMS Server with their AD Credentials. My question is,
1. Does the TMS Server need to in the domain to use the AD Authentication
2. Does the TMS server need to be added to AD server as a object if the TMS Server need to login via AD Credentials.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...