Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

tms totally lost with PE, helps !!

Hello, I'm very lost ...

I have:

TMS14.2.2

TMSPE1.1

VCS7.2.2

The keys:

  - Cisco TMS Provisioning Extension (100 active clients / devices)

  - Systems (10 systems)

  - Systems (100 systems)

.

not work tms user portal, this option was removed?

to have smartscheluder need another spare key?

webex need to integrate with other key?

sorry

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

Re: tms totally lost with PE, helps !!

Not quite sure the context of your question or what you're asking, but I'll hit on a few things.

 Cisco TMS Provisioning Extension (100 active clients / devices)

These are provisioned clients/devices such as Jabber Video, EX/MX Series, etc.

Systems (10 systems) & Systems (100 systems)

These are managed systems or rooms added into the system navigator.

not work tms user portal, this option was removed?

Are you refering to the TMS Scheduler?  If so, yes that was removed as noted in the TMS 14.2 release notes and replaced with Smart Scheduler introduced and avaliable when using TMSPE 1.1.

to have smartscheluder need another spare key?

Smart Scheduler is incorportated into TMSPE 1.1, and is installed automatically when it is, also free to use.

webex need to integrate with other key?

Information taken from the TMS data sheet:

  • A zero cost Cisco WebEx and TelePresence integration option L-WBX-TPINT or L-WBX-TPINT= (includes TMS option key L-TMS-WXOT)
Cisco Employee

Re: tms totally lost with PE, helps !!

Hi

If this is the page you are setting the permissions on then it is not what I am talking about.

As the admin user logged in to TMS click admin tools:

Click User Administration

Click Groups

Once you get a list of groups:

I have hovered over the Users Group, there is a orange button on the right, click it:

Click "Set Permissions"

Now you can start assigning permissions, by default the users group does not have any permissions at all.

Please let me know if you have any questions.

/Magnus

16 REPLIES
Cisco Employee

tms totally lost with PE, helps !!

Hi

What is the issue? What stage are you on in the deployment?

You don´t need an extra key for the smart scheduler. You need HTTPS enabled on your TMS...

/Magnus

New Member

tms totally lost with PE, helps !!

hi Magnus

Right now, I'm installing in server 14.2.2 and TMSPE1.1 TMS, but does not work smartscheluder, going to https://localhost/tmsagent/tmsportal/?locale=en_US,

how to enable https in tms? with aplicacionTMSEnableHttpsTool.exe, tells me this message

Sorry for the inconvenience

Cisco Employee

tms totally lost with PE, helps !!

Hi

First make sure HTTPS is not enabled by trying to access the tms on HTTPS.

https://localhost/tms

If not then you cannot access the smartscheduler as the connection is https.

I cannot see the message the TMSEnableHTTPSTool tells you, did you leave it out?

Are you on Windows Server 2003? TMSEnableHTTPSTool only works on 2008 (IIS 7.x)

/Magnus

New Member

tms totally lost with PE, helps !!

https does not work, the message that I get the application "TMSEnableHttpsTool" is a window that says:

"Already HTTPS has been enabled for the cisco tms website"

I have W2008 R2 64. IIS 6.5, upgrade to 7?

New Member

tms totally lost with PE, helps !!

Sorry , IIS 7.5

Cisco Employee

tms totally lost with PE, helps !!

It might help if you have a screenshot of what you are seeing when you try to access the smart scheduler. Any errors?

/Magnus

New Member

tms totally lost with PE, helps !!

tms when accessing user portal, or by https happens tms

Cisco Employee

tms totally lost with PE, helps !!

Can you access the TMSPE directory?

Systems > Provisioning > Users ?

/Magnus

New Member

tms totally lost with PE, helps !!


tms I uninstalled and removed iis, create a new site in IIS, and reinstall TMS tms now works in https! and also smartscheluder!
but I have service problems, only I can access, I do for all domain users have access? since TMS get the error acces denied!
sorry magnus

Cisco Employee

tms totally lost with PE, helps !!

Hi

Good that it is working again. The reason you get access denied is most likely because the default groups are set to "Users" only and the users group does not have any permission to access anything. If you can log in as admin, you can go to the users that is getting the access denied in TMS (under user adminstration) and make them member of the groups you want. Or you can increase the access level for "Users".

/Magnus

New Member

Re: tms totally lost with PE, helps !!

com I enter admin, I give permission (all) and keeps getting the same access denied, because it can be?

update, only if I adminsitrator permissions users can enter.

If permissions are user (read and book) does not allow access???

Message was edited by: alejandro couto

Cisco Employee

Re: tms totally lost with PE, helps !!

Hi

All users are part of the "Users" group by default and they cannot be taken out of this group. I am not sure where you provide more permissions but to provide more access to users go to:

Admin tools > User administration > Groups

Hover the Users group and you see a orange button on the right side, click that button, click "Set Permissions". From here you can modify what Users should have access to.

/Magnus

New Member

Re: tms totally lost with PE, helps !!

if I do as you say but it does not work.

if levels are Adminstrator tms can access the portal.
If Signature: User levels are either the default group or one created new, no access to anything, they can access the portal.
in version 13 .. , The new users accessing the portal tms if they can access usuaio permissions, can view scheduled conferences, etc. ..
Cisco Employee

Re: tms totally lost with PE, helps !!

Hi

If this is the page you are setting the permissions on then it is not what I am talking about.

As the admin user logged in to TMS click admin tools:

Click User Administration

Click Groups

Once you get a list of groups:

I have hovered over the Users Group, there is a orange button on the right, click it:

Click "Set Permissions"

Now you can start assigning permissions, by default the users group does not have any permissions at all.

Please let me know if you have any questions.

/Magnus

New Member

Re: tms totally lost with PE, helps !!

Thanks magnus, which forgetfulness!

Thank you very much!

VIP Purple

Re: tms totally lost with PE, helps !!

Not quite sure the context of your question or what you're asking, but I'll hit on a few things.

 Cisco TMS Provisioning Extension (100 active clients / devices)

These are provisioned clients/devices such as Jabber Video, EX/MX Series, etc.

Systems (10 systems) & Systems (100 systems)

These are managed systems or rooms added into the system navigator.

not work tms user portal, this option was removed?

Are you refering to the TMS Scheduler?  If so, yes that was removed as noted in the TMS 14.2 release notes and replaced with Smart Scheduler introduced and avaliable when using TMSPE 1.1.

to have smartscheluder need another spare key?

Smart Scheduler is incorportated into TMSPE 1.1, and is installed automatically when it is, also free to use.

webex need to integrate with other key?

Information taken from the TMS data sheet:

  • A zero cost Cisco WebEx and TelePresence integration option L-WBX-TPINT or L-WBX-TPINT= (includes TMS option key L-TMS-WXOT)
651
Views
0
Helpful
16
Replies