I have an issue with my DV-8 touchpad connected to a C60 codec losing its pairing periodically. The touchpad will somehow disconnect and will require the codec's IP Address, username and password before pairing up again and being functional.
Thanks for the response. The SW version is TC188.8.131.526266. The touchpad is over LAN. The pairing loss is very random and I thought maybe it would have something to do with a loss of network but that boardroom has not experienced any network loss. I tried to replicate the issue in a different bdroom that has the exact same codec and touchpad. The results were what I expected... no network but touchpad still functions without issue.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...