Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

TP Conductor2.2 Integration with VCS8.0 ?

Hi,

1. Can VCS-C ver8.0 directly integrated with TP Conductor2.2 (via SIP Trunk/SIP) ?

            VCS-C 8.0-------------(SIP Trunk)-------------TP Conductor2.2

2. or is it that VCS8.0 is still fully supported by TP Conductor2.2 and is integrated via SIP Trunk to CUCM?

     

            VCS-C 8.0-----------(SIP Trunk)--------CUCM8.6/9.x----------(SIP Trunk)----------TP Conductor2.2

        

Thanks

Sumit

1 ACCEPTED SOLUTION

Accepted Solutions

TP Conductor2.2 Integration with VCS8.0 ?

Hi Sumit,

VCS can be integrated with conductor xc2.2 on previous version also in a B2BUA mode.  so same model is valid for ver x8.0 also.

http://www.cisco.com/en/US/docs/telepresence/infrastructure/conductor/config_guide/Cisco_TelePresence_Conductor_with_Cisco_VCS_B2BUA_Deployment_Guide_XC2-2.pdf

check above link for more details

Thanks

alok

2 REPLIES

TP Conductor2.2 Integration with VCS8.0 ?

Hi Sumit,

VCS can be integrated with conductor xc2.2 on previous version also in a B2BUA mode.  so same model is valid for ver x8.0 also.

http://www.cisco.com/en/US/docs/telepresence/infrastructure/conductor/config_guide/Cisco_TelePresence_Conductor_with_Cisco_VCS_B2BUA_Deployment_Guide_XC2-2.pdf

check above link for more details

Thanks

alok

New Member

TP Conductor2.2 Integration with VCS8.0 ?

Hi Alok,

Thanks for the quick revert and for the useful link. Appreciate it

Thanks & Regards

Sumit

310
Views
0
Helpful
2
Replies