06-01-2010 09:40 AM - edited 03-17-2019 10:01 PM
Hello. I'm installing CTS1300 and using LCD-100-Pro-40N as an external display.
When I previously use third party LCD(NEC LCD), I used DVI to HDMI cable between TelePresence and external display.
Does LCD-100-Pro-40N also need DVI to HDMI cable? Or is HDMI to HDMI cable available since both are Cisco brand?
Solved! Go to Solution.
06-02-2010 02:17 AM
Both cables can work but Cisco recommend DVI-HDMI cable between codec and an external display.
Cheers,
Harsh
06-02-2010 02:17 AM
Both cables can work but Cisco recommend DVI-HDMI cable between codec and an external display.
Cheers,
Harsh
06-02-2010 08:51 AM
Thanks for your advice.
I confirmed that HDMI-HDMI works.
For your information, when I installed a NEC LCD, HDMI-HDMI didn't work. HDMI-DVI was the right cable.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: