Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Using LCD-100-Pro-40N as an external display

Hello. I'm installing CTS1300 and using LCD-100-Pro-40N as an external display.

When I previously use third party LCD(NEC LCD), I used DVI to HDMI cable between TelePresence and external display.

Does LCD-100-Pro-40N also need DVI to HDMI cable? Or is HDMI to HDMI cable available since both are Cisco brand?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Using LCD-100-Pro-40N as an external display

Both cables can work but Cisco recommend DVI-HDMI cable between codec and an external display.

Cheers,

Harsh

2 REPLIES
New Member

Re: Using LCD-100-Pro-40N as an external display

Both cables can work but Cisco recommend DVI-HDMI cable between codec and an external display.

Cheers,

Harsh

New Member

Re: Using LCD-100-Pro-40N as an external display

Thanks for your advice.

I confirmed that HDMI-HDMI works.

For your information, when I installed a NEC LCD, HDMI-HDMI didn't work. HDMI-DVI was the right cable.

628
Views
0
Helpful
2
Replies