Alarm1: TMS Provisioning Extension is a new feature supported in TMS 13.2. If you don’t have TMS 13.2 Installed you will need to upgrade your TMS and follow the TMS provisioning extension deployment guide.
Alarm2: Check the Time setting on your VCS Control.
>VCS Control > System >Time
Alarm3&4: Go to TMS > Administrator Settings > Configuration > TMS Agent Setting.
1st alarm - Configuration alarm: This is more notification to use “TMS Provisioning Extension” as recommend provisioning configuration instead of legacy TMS Agent mode.
2nd alarm – Data and time alarm: This alarm raise if VCS is not able to obtain time information from NTP server (also this alarm will raise right after system restart until VCS obtain time information from NTP server even all NTP and DNS parameters has properly configured)
3rd alarm – LDAP password alarm: This alarm indicating VCS is running with legacy TMS Agent mode and LDAP password is still default.
Action link will bring you help page how to resolve this alarm, but if you are not using TMS then simply login VCS by using ssh client (with root account), then change the password by executing “tmsagent_ldap_passwd” command.
4th alarm – Replication password alarm: This alarm indicating VCS is running with legacy TMS Agent mode and replication password is still default.
Action link will bring you help page how to resolve this alarm, but if you are not using TMS then simply login VCS by using ssh client (with root account), then change the password by executing “tmsagent_replication_passwd” command.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...