Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Vcs cluster state ?

someone can explain the vcs status on a cluster configuration?

my question is if the active state must be crossed between peers?, or there must be only one active vcs on the cluster?

please your help

ps: vcs version 7.1

peer 1 master:

cluster peer 1.jpg

peer 2

cluster peer 2.jpg

Thank you very much

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

Vcs cluster state ?

Hi Cristian,

This looks ok. On the master it will show peer as active whice means the peer is reachable..and same way on peer it shows master as active which again same indication that its available.

if you reboot any server and then refresh the page..then it will show uknown or unreachanble or failed.

imprtant part is on the clustering status when you scroll down..it should show succeed and will show you next resync time as well.

Thanks

Alok

2 REPLIES
Cisco Employee

Vcs cluster state ?

What you have is correct - green is good, and any red is bad.

one peer will always say "This VCS" - that's the box you are logged in on, and all the others in the list should show active - the active means that this peer can communicate with the one(s) showing up as active.

Vcs cluster state ?

Hi Cristian,

This looks ok. On the master it will show peer as active whice means the peer is reachable..and same way on peer it shows master as active which again same indication that its available.

if you reboot any server and then refresh the page..then it will show uknown or unreachanble or failed.

imprtant part is on the clustering status when you scroll down..it should show succeed and will show you next resync time as well.

Thanks

Alok

222
Views
5
Helpful
2
Replies
CreatePlease to create content