Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VCS Lync integration Certificate Problem

Hi All,

 

I’m trying to setup a test lab for VSC x8.1 and Lync 2013 based on Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-1.

 

I followed all steps in this guide at the end nothing work, I troubleshoot  to find out the problem I guess is in the Lync  certificate as attached screen shot.

Any help?

Hi All,

 

Best Regards

Ahmad Hassan 

5 REPLIES

Ahmad,I am guessing you have

Ahmad,

I am guessing you have already created the Trusted application pool in Lync using the FQDN and not IP address? Do you have server certificate on the VCS signed by a common CA that signs the Lync certs? 

Thanks!

Please rate useful posts.
New Member

Hi George,Thank you for your

Hi George,

Thank you for your replay.

Your are right I created the Trusted application pool in Lync using the FQDN and not IP, and assumed the certificate I upload to VCS is correct using CA that signs the Lync certs “ which is installed on DC of the Lync server”.

Is there any way to verify the uploaded cert. is right ?

Thanks,

From your Lync FE server,

From your Lync FE server, navigate to the VCS's admin webpage using the FQDN and see if you get errors. If you dont get error, make sure that the cert on the VCS has the "client authentication" attribute set.

Please rate useful posts.
New Member

Hi George,,I reload the

Hi George,,

I reload the certificate to VCS. login to VCS from CA and Lync server with FQDN at attached screen shot” still there is a certificate error when use IP”, the certificate is uploaded successfully, but lync connection status still “connection rejected”.

What can I do to solve this problem?  

Thanks,

New Member

Hi George,I reload the

Hi George,

I reload the certificate to VCS. I login to VCS from CA and Lync server with FQDN at attached screen shot” still there is a certificate error when use IP”, the certificate is uploaded successfully, but lync connection status still “connection rejected”.

What can I do to solve this problem?  

Thanks,

201
Views
0
Helpful
5
Replies