VCS Starter Pack phonebook for C-Codecs and MX300(g2)

[tkiel]

Hi,

Has anyone managed to get corporate phonebook to work with C-Codecs and MX300.

VCS-S x8.1

C-Codecs version 6.x and 7.x

MX300g2 version 7.0.2

Endpoints are configured as 'other device' under FindMe.

Please provide nessesary configuration. Jabber, ex90 and sx20 works fine.

regards

Thomas

[Alok Jaiswal]

Thomas

pls check the starter pack deployment guide

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Starter-Pack-Express-Deployment-Guide-X8-1.pdf

appendix 5.

C series not supported under provisioned devices.

Regards

Alok

[tkiel]

That is true, but the phonebook feature was working with vcs-s x6.x
After version 7 it stopped working and have never been working ever since.

I am not trying to provision the devices, just want to use the phonebook. It is a big issue for our customers that they are not able to look up jabber users! And it is a major task keeping 10 c-codecs synchronized in the manual phonebook. The endpoints are spread all over the world and some of the locations are powering off the endpoint after hours.

Thomas

Sent from Cisco Technical Support iPhone App