Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
VIP Purple

VCS X8.1 FindMe Display Name

Previously ran VCS X7.2.2 software and upgrade to X8.1 last week, per TAC to fix an issue.  Just noticed this morning that whenever any of our FindMe users makes a call, the display name shown on the endpoints as the incoming call is there URI prefix.  If my FindMe was Patrick Sparkman and address was patrick.sparkman@domain, the incoming call would look like patrick.sparkman and not Patrick Sparkman as it use to be.  This is only happening with FindMe users, regular endpoints registered to the VCS without FindMe have no issue with there display name from what I can see.  Beyond upgrading to X8.1, no other changes have been made.

Endpoint versions:  TC6.3, Movi 4.7

Everyone's tags (4)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

VCS X8.1 FindMe Display Name

Yeah..Its interesting...

Inbound INVITE:

Contact:

From: "Patrick Pettit" ;tag=9f9a5ce0752e6d04

To:

Outbound INVITE towards my EX90

Contact:

From: "papettit" ;tag=9f9a5ce0752e6d04

To:

P-Asserted-Identity: "papettit"

Endpoint reads display part in PAI if its listed.  I'm not sure why this isn't listed, or even if it wasn't, the endpoint would read the display part in the FROM, but its changed there as well, so not sure why it didn't keep it. 

Will explore further.

VR

P2

Cisco Employee

VCS X8.1 FindMe Display Name

Item is being tracked in: CSCun56487

ETA unknown I'm afraid. 

Hope this helps.

VR

Patrick

5 REPLIES
Cisco Employee

VCS X8.1 FindMe Display Name

Yeah..Its interesting...

Inbound INVITE:

Contact:

From: "Patrick Pettit" ;tag=9f9a5ce0752e6d04

To:

Outbound INVITE towards my EX90

Contact:

From: "papettit" ;tag=9f9a5ce0752e6d04

To:

P-Asserted-Identity: "papettit"

Endpoint reads display part in PAI if its listed.  I'm not sure why this isn't listed, or even if it wasn't, the endpoint would read the display part in the FROM, but its changed there as well, so not sure why it didn't keep it. 

Will explore further.

VR

P2

VCS X8.1 FindMe Display Name

We had remarked that in the EFT that the handlig of "authentication" / P-A-I and reweiting tof the "display name" is

not ideal.

Many Cisco devices will use the P-A-I headers display name field.

Neither the local db nor findme nor the ldap database seem to be properly matched fot that.

Please remember to rate helpful responses and identify helpful or correct answers.

Please remember to rate helpful responses and identify

Cisco Employee

VCS X8.1 FindMe Display Name

Item is being tracked in: CSCun56487

ETA unknown I'm afraid. 

Hope this helps.

VR

Patrick

VIP Purple

VCS X8.1 FindMe Display Name

Patrick Pettit wrote:

Item is being tracked in: CSCun56487

ETA unknown I'm afraid. 

Hope this helps.

VR

Patrick

It's a start, thanks!  I found out when my endpoint didn't automatically mute it's video/audio when I connected to our MCU.  I had it setup to match my name, it was looking for "Patrick Sparkman", insetad it then changed to "patrick.sparkman".

VIP Purple

FYI, fixed in VCS X8.2.

FYI, fixed in VCS X8.2, which just released.

134
Views
0
Helpful
5
Replies
CreatePlease to create content