Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Warning in VCS and TMS ( legacy TMS Agent mode)

Hello.

I have this massage in TMS and VCS system, how this fix?

in TMS: #2057 - Configuration warning - The VCS is running in a legacy TMS Agent mode; you are recommended to switch your system to use a different mode.

in VCS: The VCS is running in a legacy TMS Agent mode; you are recommended to switch your system to use a different mode

How switch to different mode?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Green

If you're not using

If you're not using Provisioning - remove the Provisioning key from the VCS.

In the web interface, go to Maintenance, Option Keys, select the provisioning key and press the Delete button.

(it could be useful to take a note of the key first in case you decide in the future you want to install it again - but it can be retrieved other ways if you lose it, ie from the Cisco Licencing Portal).

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
6 REPLIES

If you do use provisioning,

If you do use provisioning, then you need to change to TMSPE if your version of TMS support it, TMSPE v1.0 requires TMS 13.2 or later.

See deployment guide: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tmspe/install_guide/Cisco_TMSPE_Deployment_Guide_1-0.pdf

WhitePaper: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tmspe/release_note/Cisco_TMSPE_migration_white_paper.pdf

If you do not use provisioning, then you can turn this off in TMS - or ignore the warning.

/jens

Please rate replies and mark question(s) as "answered" if applicable.

 

Please rate replies and mark question(s) as "answered" if applicable.
New Member

I cant find this option in

I cant find this option in TMS or VCS.

And maybe you know how fix this problem (in attachment). I try launch monitoring, system ask me domain. but my system not in domain.

TMS: Administrative Tools

TMS: Administrative Tools/General Settings/Provisioning Mode

I take it you do not use provisioning then?

/jens

Please rate replies and mark question(s) as "answered" if applicable.

Please rate replies and mark question(s) as "answered" if applicable.
New Member

Hello.1. In TMS it`s switch

Hello.

1. In TMS it`s switch off. How do it in VCS?

2. Not help.

VIP Green

If you're not using

If you're not using Provisioning - remove the Provisioning key from the VCS.

In the web interface, go to Maintenance, Option Keys, select the provisioning key and press the Delete button.

(it could be useful to take a note of the key first in case you decide in the future you want to install it again - but it can be retrieved other ways if you lose it, ie from the Cisco Licencing Portal).

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Try the same log-in you use

Try the same log-in you use to log into TMS.

/jens

Please rate replies and mark question(s) as "answered" if applicable.

Please rate replies and mark question(s) as "answered" if applicable.
174
Views
10
Helpful
6
Replies
CreatePlease to create content