Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cisco Employee

CUCM 9.1(2) is now available

8 REPLIES
New Member

Re: CUCM 9.1(2) is now available

I recently took a CM from an installation that started on version 9.1.1a and upgraded to 9.1.2.  Now CM reports that the partitions are unaligned.  Everything looked good before.  Per the release notes, this is to be expected for upgrades prior to 8.0(2), but I am not sure why this would happen with a machine that started out life as 9.1.1a.  Any ideas?

Cisco Employee

CUCM 9.1(2) is now available

A partition alignment warning was added in 9.1.2 to alert you to the fact that you might not be running on proper VM specs, or used the official OVA.  If you are running on a VM that is < 80GB there is a known issue with partition alignment and the new 9.1 OVA needs to be used to fix the issue. That is why, you already had the issue on 9.1.1a ova, but now, it shows the warning, so we recommend that you use the new ova for proper allignment.

New Member

CUCM 9.1(2) is now available

Hello,

We're Cisco partner, alowed to get the NFR.

We've bought the NFR, and the edelivery team told that the image can be dowloaded from CCO.

But it's not the case.

How can we get all the bootable ISO image?

Regards,

Antra

New Member

CUCM 9.1(2) is now available

Antra,

After you place your order, you should receive an eDelivery Order Notification email.  The email contains a link to a special bootable ISO download site.  This is completely different from the regular CCO download site that you correctly noted only has non-bootable ISOs.

Cheers,

Neal

CUCM 9.1(2) is now available

Hi All,

We are planning for CUCM upgrade from 8.6.2 to 9.1.2.

OVA 8.x for 7500 users (2 CPU, 2X 80 GB Disk) was used as a template for our current 8.6.2 CUCM environment.  For the 9.1.2 upgrade,  do we have to use the 9.1x OVA template with the following configuration for 7500 users:2 CPU and 110 GB disk space.

Regards,

Alagusundaram S

Hall of Fame Super Red

CUCM 9.1(2) is now available

Hi Alagusundaram,

No, you should be good to go

Upgrading on a Virtual Server

If you run Cisco Unified Communications Manager on a virtual  server, and are upgrading to the latest release, you must make sure that  the virtual server Guest Operating System and RAM meet the requirements  for the latest release.


Note


In Unified Communications Manager Release 9.1, the following changes have been made to the OVAs:

  • The number and the size of the vDisk for the 7500 user  and 10000 user OVAs have changed from 2 x 80 GB to 1 x 110 GB. If your  current VM uses the original disk sizes, do not change the size or  number of disks (keep the originals in place).
  • The number of vCPU for the 2500 Limited User OVA has changed from 1 vCPU to 2 vCPU.

From;

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/9_1_1/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91_chapter_01.html#CUCM_TP_U4ABCEF5_00

Cheers!

Rob

"May your heart always be joyful
And may your song always be sung
May you stay forever young " 

- Dylan

CUCM 9.1(2) is now available

Hi Rob,

Many thanks for your response.

Here my current Machine uses 2X80 GB HDisk. Means I can just go with existing VM for 9.1.2.

Regards,

Alagusundaram

CUCM 9.1(2) is now available

Hi Rob,

Tested the same in Lab, Here we go.

Regards,

Alag

8285
Views
5
Helpful
8
Replies