Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

info cucm 10.5 from 7.1.3

Hi, I wanted to know if i can make upgrade from version 7.1.3 to 10.5 without the virtualization, reusing my machines.

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions

You will need to install VM

You will need to install VM Ware on a bare metal server, this then becomes a host. A Host server then can run multiple guest servers depending on hardware etc.

Depending on the size of your current infrastructure and of course, your budget will depend on how many Host servers you have and how many guest you will need to run.

I would recommend reading through the documentation on the links below;

http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware

http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines

New Member

The migration process is bit

The migration process is bit involved. You are going to need a couple UCS chassis to run VMWare, plus VMWare licenses. You can a tool called PCD (Prime Collaboration Deployment) to migrate to CUCM 10.x. Check out the link below on PCD.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/pcdadmin/10_5_1/CUCM_BK_U35347D2_00_pcd-administration-guide-1051/CUCM_BK_U35347D2_00_ucmap-administration-guide-1051_chapter_00.html

13 REPLIES

CUCM 10.x is only supported

CUCM 10.x is only supported on a VM Ware virtualised platform, i've never tried but would assume if you were to try and install it on a bare metal server it would fail at the hardware detection stage and not let you continue.

 

New Member

then I'll have to centralize

then I'll have to centralize everything in a virtual machine.
I have a publisher and a subscriber physicists.
There is a system of free virtualization?

You will need to install VM

You will need to install VM Ware on a bare metal server, this then becomes a host. A Host server then can run multiple guest servers depending on hardware etc.

Depending on the size of your current infrastructure and of course, your budget will depend on how many Host servers you have and how many guest you will need to run.

I would recommend reading through the documentation on the links below;

http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware

http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines

New Member

currently I have a CUCM 7.1.3

currently I have a CUCM 7.1.3 on a publisher and a subscriber server on two MCS7825-I4 with 4gb of ram.
I would upgrade everything to version 10.5. + add IM&P
how should I proceed?
Can you help me?
Thank you

 

New Member

The migration process is bit

The migration process is bit involved. You are going to need a couple UCS chassis to run VMWare, plus VMWare licenses. You can a tool called PCD (Prime Collaboration Deployment) to migrate to CUCM 10.x. Check out the link below on PCD.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/pcdadmin/10_5_1/CUCM_BK_U35347D2_00_pcd-administration-guide-1051/CUCM_BK_U35347D2_00_ucmap-administration-guide-1051_chapter_00.html

New Member

ok thanks.But when I

ok thanks.

But when I purchased the 10.5 version in the file possible to download cucm_10.5_vmv7_v1.8.ova not there.

how can I do?

With a CCO ID and correctly

With a CCO ID and correctly assigned contracts you can download the ova template from here;

http://software.cisco.com/portal/pub/download/portal/select.html?&mdfid=285963825&flowid=50402&softwareid=283088407

If you are using VM Ware ESXi version 5.X then you need to download cucm_10.5_vm8_v1.8.ova

For ESXI version 4.x  you need cucm_10.5_vm7_v1.8.ova file.

Regards,

Richard

New Member

the problem is that they have

the problem is that they have accidentally assigned the number of the contract to another distributor.
In addition, during the summer we can not contact them.
wishing you can download the file for me?

ucm_10.5_vmv7_v1.8.ova not there.

i have esxi host 5.5

VIP Purple

You can ask Disti to download

You can ask Disti to download for you.It is a small size file [0.36MB]

 

regds,

aman

New Member

sorry but what is name of

sorry but what is name of Disty????

when i send message i have only disty_user1, is he?

 

VIP Purple

What I meant to say if your

What I meant to say if your Procurement Team have placed through the Distributor, they can help u in downloading the file through their CCOId  or what I suppose your CUCM 7 would be under support contract with Cisco.

 

You can open the TAC case and share the genuine problem of contract number being mapped wrongly.They would provide u the OVA.

 

regds,

aman

New Member

the problem is it! my

the problem is it! my procurement team don't answer.

I urgently need this template
New Member

then I'll have to centralize

then I'll have to centralize everything in a virtual machine.
I have a publisher and a subscriber physicists.
There is a system of free virtualization?

437
Views
0
Helpful
13
Replies