Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

UCM v6.2 to CUWL users

Can I migrate from UCM v6.2  directly to CUWL  (10) or we have to migrate them first to Enhanced UCL and then to UWL.??

3 REPLIES
VIP Purple

Hi,You can simply run License

Hi,

You can simply run License Count Utility [downloadable from Cisco] .Run it on PC from where Publisher is reachable.

Once done, u will get an excel file consisting of used /unused DLUs , MAC address /IP address of Publsiger and count for CUWL /UCL users.

After u migrate to CUCM 10, share this file along with txt file generated from PLM to licensing@cisco.com to get the permanent license for users.

 

regds,

aman

New Member

Hi Aman,Thanks fot the answer

Hi Aman,

Thanks fot the answer. But I'm looking forward to check wich part numbers are correct in order to have a migration without UCSS and Smartnet. So I wonderign if I should order:

R-CUWL-STD-K9

MIGE-UCM-UWL-STD

 

OR

R-UCL-UCM-MIG-K9

MIG-CUCM-USR-A

+

R-CUWL-STD-K9

MIGE-UCM-UWL-STD

 

Thanks,

Ivan

VIP Purple

Hi Ivan, You need to place

Hi Ivan,

 

You need to place order for below since the users are different.Run the LCU to get the correct count.

R-UCL-UCM-MIG-K9

MIG-CUCM-USR-A

+

R-CUWL-STD-K9

MIGE-UCM-UWL-STD

 

regds,

aman

76
Views
0
Helpful
3
Replies
CreatePlease to create content