I am in the process of upgrading my UCXN server from 8.6 to 10.0. I have the licenses converted and loaded on Prime Licensing Manager (PLM). The upgrade is done and my UCXN server is connected to PLM. When the licenses sync, my user mailboxes come in as Basic mailboxes and not CUWL Standard messgaing. I am borrowing over 200 mailboxes from the CUWL Standard license section.
I know in CallManager, you need to add the Owner User ID to each phone and that is what moves the license up the tier to the next level. What needs to be filled in on UCXN to move the mailboxes from Basic to CUWL Standard?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...