Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Upgrade from CUCM 7.1.5 to CUCM 9.1.2

We have CUCM 7.1.5 four server cluster on hardware servers. Recently we have planned to upgrade this cluster to CUCM 9.1 on VMWare. 

If we install CUCM 9.1 on VMs and do the neccessary configuration, can we obtain neccessary license from Cisco? We have UCSS for this CUCM cluster

We are not planning to do Linux-to-Linux upgrade because we need some configuration changes in new CUCM cluster. So our plan is to do a fresh installation of CUCM 9.1 on VMs and migrate exsisting license to this.

can any one explain how should we obtain license for new version and what will be required for it?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

I did the same upgrade path.

I did the same upgrade path. After you open a case on licensing@cisco.com, they will tell you to use a tool called Cisco License Count Utility that will generate a report. So you send this report to Cisco and they will convert the existing licenses to be used on ELM. You can check the process on the PPT attached.

4 REPLIES
Cisco Employee

Go ahead and install your new

Go ahead and install your new cluster, then you'll use an ELM instance for the licenses, choose which one you'll use, and then reach licensing@cisco.com for the license migration as you'll need some info from ELM.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Thanks Jaime

Thanks Jaime

New Member

I did the same upgrade path.

I did the same upgrade path. After you open a case on licensing@cisco.com, they will tell you to use a tool called Cisco License Count Utility that will generate a report. So you send this report to Cisco and they will convert the existing licenses to be used on ELM. You can check the process on the PPT attached.

New Member

Thanks a lot Alex ....

Thanks a lot Alex ....

937
Views
4
Helpful
4
Replies
CreatePlease to create content