We currently have a customer that is currently running the BE6000 10.0 release, but this customer is also going to get a second BE6000 installed. We want the CUCM on the second BE6000 to be in the same cluster as the CUCM on the first BE6000 system.
This existing BE6000 system has CUCM 10.0, IM and Presence 10.0, Unity Connection 10.0, and Informacast paging. How do we go about upgrading the BE6000 software on the existing system from 10.0 to 10.5? How long does it take to do the 10.0 to 10.5 upgrade?
Should the upgrade occur on the existing BE6000 system before installing the second BE6000 system, or should we install the second BE6000 system first and then upgrade both of the BE6000 systems?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...