Unity Connection failover

[adamgibs7]

Hello,

I have only 1 no's of unity connection , when I shut my cucm publisher 9.1 ,  unity connection 9.1 doesn't works with cucm subscriber.

Also I get a choppy voice  when I play from the phone or when I press a message button the greeting from the system  is chopping.

thanks 

[Jaime Valencia · Accepted solution]

Have you configured both servers in CUC??

Does the CUCM side integration has the CUCM group with both servers??

[adamgibs7]

Dears

When i press a message button from my phone  i get a choppy audio,

Thanks

[Rob Huffman]

Hi Adam,

Java is most correct here (+5 J-man!)

Can you check these settings in CUC for the "Secondary" server config. This would add the Sub

to the list of available CUCM servers

Step 32 On the Edit Servers page, do the following substeps if the Cisco Unified CM cluster has secondary servers. Otherwise, skip to Step 33.

##

a. Under Cisco Unified Communications Manager Servers, click Add.

##

b. Enter the following settings for the secondary Cisco Unified CM server and click Save.

#

#

Table 6-16     Settings for the Cisco Unified Communications Manager Servers 

# Field	# Setting
# Order	# Enter the order of priority for the Cisco Unified CM server. The    lowest  number is the primary Cisco Unified CM server, the higher    numbers are  the secondary servers.
# IP Address or Host Name	# Enter the IP address (or host name) of the secondary Cisco Unified CM server.
# Port	# Enter the TCP port of the Cisco Unified CM server that you are     integrating with Cisco Unity Connection. We recommend that you use  the    default setting.
# TLS Port	# Enter the TLS port of the Cisco Unified CM server that you are     integrating with Cisco Unity Connection. We recommend that you use  the    default setting.
# Server Type	# Click Cisco Unified Communications Manager.

http://www1.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucm_sccp/guide/cucintcucmskinny050.html

Cheers!

Rob