I'm working on development of IVR system using TSP and CTI ports. I got two questions unresolved for a long time.
1. For CUCM 5.0 and above, TSP only works in English windows. Is there a TSP version can run well in Simplify Chinese environment?
2. Tesing TSP on CCM 4.2 and 4.3, if a off-net OB call is made from 79XX or CTI port to PSTN, TSP can't capture DTMF entries from the PSTN side. But it is pretty good on CUCM 6.0 and 7.0. For all these testing, one same 2811 VG is used. I wonder if this is a bug of CCM, or any parameters should be set?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...