I would like to ask is there is a way on CUCM allowing same as mobile system below scenario
in mobile system when you have a call running and you recieve 2nd call while 1st call still in 2nd call caller get notification that he is in waiting mode (which mean that called number have another call running),
many times you call someone and he did not answer you and after awhile he call and tell you that he was already in another call when you was calling, and he was not able to answer, then you think is there is any way to get notified when the called number are already on call.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...