Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

5.0 UM to VM with Exchange 2003

I have a client that does not want to buy a Exchange Cal license for there VM users.

Currently they have about 500 users installed on a Unified Exchange 2003 Server. They want to move 370 users to a VM runtime Exchange server.

I have seen the white paper for Mixed license and it states:

How to Set Up a Cisco Unity Configuration to Support a Mixed VM/UM License:

Segmenting Voice Messaging Subscribers

To allow for careful management of Voice Messaging subscribers, we recommend doing one of the

following:

• Exchange only-Dedicate a storage group on one or more Exchange servers that houses all Voice Messaging subscribers.

My question is can I just create a storage group on the UM exchange server for the VM users?

What are the steps for doing this?

Permissions Wizard?

Thanks,

Greg Nystrom

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: 5.0 UM to VM with Exchange 2003

You cannot, you need to create new accounts, as the old ones are unified and are referenced by the email as well. To seperate UM from VM doing the COS change is not enough, you still need to seperate email mailbox from VM mailbox, hence creating new AD user with new Exchange mailbox. Typically the VM accounts are called somthing like vm-alias.

Chris

6 REPLIES
Hall of Fame Super Silver

Re: 5.0 UM to VM with Exchange 2003

You don' really need a seperate storage group, unless you want to. You can simply create new AD users/Exchange mailboxes in the same mailstore, you can either do this via Unity if you have sufficient right allocated or create these users/mailboxe ahead of time and import in Unity. Make sure you specify the COS as VM rather than UM in Unity when building these subscribers.

Chris

New Member

Re: 5.0 UM to VM with Exchange 2003

Thanks Chris,

This does work great with the new COS however the UM accounts are already created in Exchange.

How can I use the DiRT tool to pull the 370 UM users out and push them back in as a VM users or can I bulk edit the users?

Thanks again!

-G

Hall of Fame Super Silver

Re: 5.0 UM to VM with Exchange 2003

You cannot, you need to create new accounts, as the old ones are unified and are referenced by the email as well. To seperate UM from VM doing the COS change is not enough, you still need to seperate email mailbox from VM mailbox, hence creating new AD user with new Exchange mailbox. Typically the VM accounts are called somthing like vm-alias.

Chris

New Member

Re: 5.0 UM to VM with Exchange 2003

Thanks Chris,

One more question when creating a VM mailbox with Unity Exchange 2003 does that require a M$ CAL.

I see no difference with the VM mailbox vs UM mailbox. M$ defines a CAL as a mailbox. I know that MS is on the honor system for Exchange but my client does not want a audit and come up short.

Thanks,

-G

Hall of Fame Super Silver

Re: 5.0 UM to VM with Exchange 2003

No, the CAL cost is built into the Unity user license.

HTH,

Chris

New Member

Re: 5.0 UM to VM with Exchange 2003

Greg,

We did and still use this type of app. we did create a seperate store and use alias of vm-xxxxxxx/user in unity. I am not our exchange guru, and he is out today but i can ask him what we did. i dont think we used the wizard as we found it sometimes useless.and all vm- accts are in that store in xchange.

146
Views
5
Helpful
6
Replies
CreatePlease to create content