Has anyone experienced issue with 7905G and 7912G phones on CUCM 10.5x. It seems that when the system goes down and comes back up, the 7905G's and 7912G's stay stuck at "Configuring CM List". There was an issue with the network where the nexus had a processor failure. Once the phones came back online only the 7905's and 7912's did not re-register. We needed to manually walk around and reset the 7912 and 7905 phones. Has anyone experienced similar issues?
Sorry the delay. Those two models 7905 and 7912 are in End of support for several year, so the problem is with firmware for those guys, which is not supported by these newer CUCM release. So that's why you're getting problems.
If you take a look on Cisco Collaboration Systems Release Summary Matrix for IP Telephony you will see that both phones does not show anymore
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...