Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

AA Dial by Name Directory

I am having an issue with the dial by name feature in the AA script. Where is the directory located? Is it the directory entries in the telephony services mode or is it actually in the CUE configuration?

Thanks in advance.

Nathan Richie

4 REPLIES
Hall of Fame Super Red

Re: AA Dial by Name Directory

Hi Nathan,

The CUE AA searches all names entered in the CUE directory.

Hope this helps!

Rob

New Member

Re: AA Dial by Name Directory

Rob,

Thanks for your reply. I guess I am confused on what constitutes the CUE directory. Is it the ' username mariam phonenumber "6909" ' command? If so, how would it differentiate between the first and last name?

Thank you in advance.

Nathan

Hall of Fame Super Red

Re: AA Dial by Name Directory

Hi Nathan,

Yes, you are right on the money! You do not have to enter a First and Last name as this is optional. In your example the AA would search on Mariam.

The following information is required for adding or modifying a user:

•Username-The user ID. The username must be at least 3 and no more than 32 characters in length. Cisco Unity Express allows only letters, numbers, and the characters underscore (_), dot (.), and dash (-) in user IDs. Users IDs must start with a letter. Do not use spaces in the username.

•(Optional) Full name-First and last name of the user. Enter this name in quotation marks (" ").

•(Optional) Group-Name of an existing group in which this user is a member.

•Password-Temporary password for this user. The password must be at least 3 and no more than 32 characters in length. Spaces are not allowed. When the user logs in to the GUI for the first time, the application requires the user to change the password. The user's password does not expire.

•PIN-Personal identification number. The PIN must be at least 3 and no more than 16 digits in length. When the user logs in to the voice-mail system for the first time, the application requires the user to change the PIN. The PIN does not expire.

SUMMARY STEPS

EXEC mode:

1. username name [create | delete | fullname [first "first-name" | last "last-name" |

display "full-name"] | group group-name | language | password password | pin number]

2. show users

or

show user detail username name

3. copy running-config startup-config

Configuration mode:

1. config t

2. username name [create | phonenumber phone-number | phonenumberE164 full-number]

3. exit

4. show users

or

show user detail username name

5. copy running-config startup-config

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_1/ccm_cli/ch4users.html#wp1060327

Hope this helps!

Rob

New Member

Re: AA Dial by Name Directory

Rob,

Thanks for your help!

Regards,

Nathan

166
Views
5
Helpful
4
Replies
CreatePlease to create content