I am a New Bie in Voice Mail system and I would require some assistanace from you.I have a Call Manager 6.0 and Unity Connection 2.1 and a DID range of
47XX range .What I want is to create is an Auto Attendant System .Once outside caller from PSTN calls our company it should go to auto attendant.If it is
office hours I want a message like press 1 if you know the direct ext,Press 2 for searching by name and Press 3 for operator.And if it is not in Office
hours Unity connection should play that "We don't work at this time".
Could somebody help me on this with the detailed steps to be done at Call Manager and at Unity Connection.I had read some cisco guides , and got some overview about Call handlers ,Call Routing Rules,etc but they couldn't provide me the configuration of a good example.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...