Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Activate Email Alert on RTMT

I read on  Cisco Unified Communications Manager Real-Time Monitoring Tool  Administration Guide, Release 8.0 to activated the email message of alerts: To configure RTMT to send alerts via e-mail, you must configure DNS. For information on configuring
the primary and secondary DNS IP addresses and the domain name in Cisco Unified Communications
Manager Server Configuration, see the “DHCP Server Configuration” chapter in the Cisco Unified
Communications Manager Administration Guide.

But or installation of the service we use the router like our DHCP server to give IP address to the ipphones and also for PC. Right now our clients they are working with this topology.

You know another solution to stablish email notifications.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Activate Email Alert on RTMT

No, this is applied on the UCM OS CLI. I hyperlinked the commands to the supporting documentation for you. You can also review the Command  Line Interface Reference Guide for Cisco Unified Communications  Solutions Release 8.0(2) if you prefer.

3 REPLIES
VIP Super Bronze

Re: Activate Email Alert on RTMT

Yes, just set the commands from the CLI:

set network domain domain-name

set network dns {primary | secondary} ip-address

Be careful if you are on 8.0 or later as this will impact the licensing MAC.

Community Member

Re: Activate Email Alert on RTMT

this it will applied in the router?.

I will try to do this..

Thanks!!!

VIP Super Bronze

Re: Activate Email Alert on RTMT

No, this is applied on the UCM OS CLI. I hyperlinked the commands to the supporting documentation for you. You can also review the Command  Line Interface Reference Guide for Cisco Unified Communications  Solutions Release 8.0(2) if you prefer.

419
Views
0
Helpful
3
Replies
CreatePlease to create content