Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Adding a Subscriber to CUCM 9.1 BE6K

Hello guys,

Good day to all of you!

I would like to ask if someone knows a certain topic or a link that would provide a step-by-step procedure on how to add a subscriber to a CUCM 9.1 BE6K?

We would like to configure a subscriber as a standby fail-safe for our CUCM, so that if ever something happens, the subscriber can still hold phone operations here in our office.

Any information that could help or even suggestions would be greatly appreciated!

Thanks!

Kind regards,

Art

Network Engineer
Net Pacific Philippines
CCNA R&S
CSCO12379161       

Network Engineer Net Pacific Philippines CCNA R&S CSCO12379161
2 ACCEPTED SOLUTIONS

Accepted Solutions
Blue

Adding a Subscriber to CUCM 9.1 BE6K

HI

You can add subscriber like we do it for normal CUCM. Take the supported hardware, Take the DVD provided.. Install it and select no when it ask if this is 1st node in the cluster..after this it will ask for CUCM publisher details.. Give those details anre you are ready to go....

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Adding a Subscriber to CUCM 9.1 BE6K

Hi Arturo,

If you get stuck just follow this guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/9_1_1/CUCM_BK_I05CD008_00_installing-cucm-91_chapter_01.html

Adding subscriber is straight forward. Good luck.

Please rate replies and mark question as "answered" if applicable.

Please rate replies and mark question as "answered" if applicable.
5 REPLIES
Blue

Adding a Subscriber to CUCM 9.1 BE6K

HI

You can add subscriber like we do it for normal CUCM. Take the supported hardware, Take the DVD provided.. Install it and select no when it ask if this is 1st node in the cluster..after this it will ask for CUCM publisher details.. Give those details anre you are ready to go....

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Adding a Subscriber to CUCM 9.1 BE6K

Hi Ronak,

Thank you so much for your fast response!

Will do as instructed, and if we might bump into something I hope you would be able to assist us.

Cheers,

Art

Network Engineer
Net Pacific Philippines
CCNA R&S
CSCO12379161

Network Engineer Net Pacific Philippines CCNA R&S CSCO12379161
Blue

Adding a Subscriber to CUCM 9.1 BE6K

Hi

Yes why not, we are here to help only.

If you are Cisco certified partner and If you are stuck in any step, you can open Cisco PDI case and we will help you further. You can reach PDI team at cisco.com/go/pdihelpdesk.

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Adding a Subscriber to CUCM 9.1 BE6K

Hi Arturo,

If you get stuck just follow this guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/9_1_1/CUCM_BK_I05CD008_00_installing-cucm-91_chapter_01.html

Adding subscriber is straight forward. Good luck.

Please rate replies and mark question as "answered" if applicable.

Please rate replies and mark question as "answered" if applicable.

Adding a Subscriber to CUCM 9.1 BE6K

Hi rr,

Thanks to you too!

Cheers,

Art

Network Engineer
Net Pacific Philippines
CCNA R&S
CSCO12379161

Network Engineer Net Pacific Philippines CCNA R&S CSCO12379161
3380
Views
10
Helpful
5
Replies
CreatePlease login to create content