Adding Diaogic Voice boards to an exsiting Unity 4.02

[spoure]

I have a Unity server with CCM TAPI. I need to add 2 Dialogic boards to the server for Dual integration with a Legacy Tardian PBX ... I am looking for document explaining the procedure for adding the Voice boards to am existing Unity server...I can not find the link

[gpulos]

try this link:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_guide_chapter09186a008015080c.html

the unity configuration guides should have an appendix on dialogic boards and installing them.

[Brandon Buffin]

The following links should help.

Task List for Adding, Exchanging, or Removing Voice Cards Without Failover

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a7d.html#wp1295975

Installing Voice Cards

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_guide_chapter09186a00804419f0.html#wp1505050

ECI (Tadiran) Coral III Serial Integration Guide for Cisco Unity 4.0

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_configuration_guide09186a008014767f.html

Hope this helps. If so, please rate the post.

Brandon

[spoure]

Thanx for the info...In 3.x we used to licence for Dual integration TAPI and SMDI. My understanding is that we dont need licensing for SMDI integration with a legacy Tardian PBX in 4.x. Please verify...If that is the case where we set the Unity for the Dual Integration...What tool do we use for IP/PBX integration.