After unity 5 migated from Ex2003 to 2007 UC not working
I migrated unity v 5 from Exchange 2003 to Ex 2007.At the time of migration wizard I am expecting a script that will generate by unity need to run in Exchange server 2007. But I didnt get that script and the sutup program finished without any error.
Now the problem is I can able to create subscribers and everything working fine. But the unity is not sending messages to Exchange
Event Type: Error Event Source: CiscoUnity_MALEx Event Category: Error Event ID: 30012 Date: 2/1/2010 Time: 11:20:27 AM User: N/A Computer: AT-UNITY Description: An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation. The SysCheck utility may assist in diagnosing the problem.
Event Type: Error Event Source: CiscoUnity_MALEx Event Category: Error Event ID: 30003 Date: 2/1/2010 Time: 11:20:27 AM User: N/A Computer: AT-UNITY Description: An attempt to access the Primary Exchange Mailbox Store by CsBMsgConnector via MAPI has failed. The MAPI subsystem return the following error: The Microsoft Exchange Server computer is not available. Either there are network problems or the Microsoft Exchange Server computer is down for maintenance..
Event Type: Error Event Source: CiscoUnity_UMR Event Category: UMR Thread Error Event ID: 137 Date: 2/1/2010 Time: 11:18:17 AM User: N/A Computer: AT-UNITY Description: Attempts to deliver Unity Message Repository messages have failed due to Unity configuration or connectivity issues with the Partner Mail Server.
AvUMRSyncSvr will suspend message delivery for 300 seconds, after which message delivery will be attempted again.
During this outage, messages may accumulate in the temporary store. 0x00001244
Re: After unity 5 migated from Ex2003 to 2007 UC not working
Posting a reply a little late but I came accross the same issue migrating 5.0.1, from exch2k3 to 2k7.
Scratched my head for a little bit and then re-ran the permissions wizard and the service configuration wizard. You want to make sure to test your service accounts credentials as the wizard does not verify them.
After re-running those and verifing the correct pw's for the account everything started working.
Also make sure to follow the guide provided by Cisco that the user above posted.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...