Please enter '***' to change boot configuration: Filesystem type is reiserfs, partition type 0x83 kf: a1 : (hd0,0)/bzImage root=/dev/hda1 ro plat=aim kf: a2 : (hd0,0)/bzImage root=/dev/hda1 ro plat=aim in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=aim in grub_open1: /bzImage root=/dev/hda1 ro plat=aim in grub_open2: /bzImage root=/dev/hda1 ro plat=aim in grub_open3: /bzImage root=/dev/hda1 ro plat=aim 1 in grub_open4: /bzImage root=/dev/hda1 ro plat=aim kernel_func: kt: 0 in boot func: kt: 0ÿ
However it then keeps repeating this and never (seems) to go any further. At first I thought it was just a corrupt software image so I tried to load up 7.2.1 (latest for this module) using boot helper and I'm able to get into the bootloader and make my configuration options:
Please enter '***' to change boot configuration: ***Probing...[EEPRO100]Found I ntel EtherExpressPro100 82559ER at 0x00000000 ROM address 0x003FC000 Ethernet addr: 00:04:9A:49:3C:70 equalizer val: 16
ServicesEngine Bootloader Version : 1.0.17
but after issuing the boot helper and the AIM-CUE sucessfully downloading the image I then get this:
Unfortunately the module then goes back to restarting constantly. Just incase I was unlucky enough to get a faulty image I tried an older one and got the same results. I'm unfortunately at a bit of a loss on what to do next. Could it be a hardware issue?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...