finalCalledPartyNumber is the actual last DN CUCM dialed
ie 5560 CFA to 91978XXXXXXX
then it would be 91978XXXXXXX
if you apply called party masks using a translation pattern then what you have configured shows up if you hit the translation pattern, let's say a PLAR is an example, you don't dial but you'll get the value for called party mask
lastRedirectDn, from previous example shows 5560 as it was the last party that had a redirect instruction for the call
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...